Norway


- 180228112524 1 540x360 - Smart heat control of microchips — ScienceDaily

Thermal images.

Credit: Image courtesy of Karlsruhe Institute of Technology

Technological progress in the electronics sector, such as higher speeds, reduced costs, and smaller sizes, result in entirely new possibilities of automation and industrial production, without which “Industry 4.0” would not be feasible. In particular, miniaturization advanced considerably in the last years. Meanwhile, physical flow of a few electrons is sufficient to execute a software. But this progress also has its side. Processors for industrial production of less than 10 nm in dimension are highly sensitive. By specific overloading through incorrect commands, hackers might initiate an artificial aging process that will destroy the processors within a few days. To defend such attacks on industrial facilities in the future, researchers of KIT are now working on a smart self-monitoring system.

The new approach is based on identifying thermal patterns during normal operation of processors. “Every chip produces a specific thermal fingerprint,” explains Professor Jörg Henkel, who heads the team at the Chair for Embedded Systems (CES). “Calculations are carried out, something is stored in the main memory or retrieved from the hard disk. All these operations produce short-term heating and cooling in various areas of the processor.” Henkel’s team monitored this pattern with sensitive infrared cameras and reproduced changes in the control routine from minimum temperature changes or temporal deviations of a few milliseconds. The setup with infrared cameras was used to demonstrate feasibility of such thermal monitoring. In the future, sensors on the chip are planned to assume the function of the cameras. “We already have temperature sensors on chips. They are used for overheat protection,” Jörg Henkel says. “We will increase the number of sensors and use them for cyber purposes for the first time.” In addition, the scientists want to equip the chips with neural networks to identify thermal deviations and to monitor the chip in time.

The researchers think that their smart control will be applied in industrial facilities first. As mostly static control routines are executed, deviations are easier to identify than in a smartphone, for instance. However, also industry computers are exposed to dynamic threats. “As soon as the hackers will know that we monitor temperature, they will adapt,” computer scientist Hussam Amrouch, who works in the team of Jörg Henkel, explains. “They will write smaller or slower programs, whose heating profiles will be more difficult to identify.” Right from the start, the neural networks will therefore be trained to identify even modified threats.

Story Source:

Materials provided by Karlsruhe Institute of Technology. Note: Content may be edited for style and length.


Cite This Page:


Karlsruhe Institute of Technology. “Smart heat control of .” . , 28 February 2018. <www..com/releases/2018/02/1802282524.htm>.

Karlsruhe Institute of Technology. (2018, February 28). Smart heat control of microchips. ScienceDaily. Retrieved March 26, 2018 from www.sciencedaily.com/releases/2018/02/180228112524.htm

Karlsruhe Institute of Technology. “Smart heat control of microchips.” ScienceDaily. www.sciencedaily.com/releases/2018/02/180228112524.htm (accessed March 26, 2018).



Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here