The deployment of smart meters is fast gaining traction worldwide. According to forecasts published by Machina Research, Europe’s connected energy market will be worth $26 billion alone by 2026 with a potential 158 million new smart meters set to be installed across the continent. While cellular technology presents an attractive connectivity option for smart meter solutions, there remain some hurdles to overcome.


  • The global smart meter market is expected to roll out over 588 million units by 2022 and mobile network operators are set to capitalize from the rapid adoption of smart metering by
    utility providers.
  • Cellular technology allows utility companies to connect their smart meters easily and inexpensively virtually anywhere.
  • Arm Kigen family helps to overcome various barriers to integrating cellular technology for large scale, cost sensitive smart meter deployments.

Automated meter reading is just beginning

Today, smart metering is largely associated with automated meter readings (AMR) where is collected automatically removing the need for field visits. It is often deployed where manual collection is expensive and to minimize maintenance costs. However, the benefits of smart metering for utilities are much more encompassing – from improved voltage regulation, outage management and restoration, to enhanced (for example theft detection), operational efficiencies and overall network resiliency and reliability. Stronger customer relationships are also forged as end customers benefit from greater transparency, reliability and service.

By leveraging smart metering and other technologies, utility providers can start providing value-adding services, such as dynamic pricing, -time billing and -time access to connected devices for remote monitoring, analysis and control of usage. This opens new revenue streams for utility providers, positioning them as broader service providers, and smart meters – as a hub for interoperating with all sorts of of Things (IoT) devices and sensors at customer locations.

In Europe, the EU and local government regulations are driving the mass rollouts of electric smart metering, with the roll-out target of 80% market penetration by 2020. The UK decided to mandate all energy suppliers to offer smart meters to every home by 2020 (a total of 26 million potential installations). Recent natural and man-made disasters are another major driver for the new innovative smart meter technologies now entering the utility sector at a rapid pace, as smart meters can provide valuable functions during disasters and recovery.

Smart metering offers enormous opportunities, so it is not surprising that many utility providers have been quick to throw their hats into the ring. The ecosystem is growing too, with various major alliances forged between utility providers and automation producers, and more influential players from outside the utilities sector coming to the market with various smart meter connected automation tools, such as Google Nest.

New opportunities for MNOs

According to GlobalData, there will be over 588 million smart meter units installed worldwide by 2022. This presents a sizeable market that mobile operators can tap into either by providing ‘connectivity only’ or as an end-to-end solution provider, where they can facilitate integration of or provide back-end management, billing and remote cloud management systems.  For example, China Mobile offers automated meter reading (AMR) service for electric utilities, consisting of an NB-IoT connected smart meter and a cloud-based AMR platform. The solution optimizes the meter reading process, provides insight into real-time energy consumption and enables accurate billing.

The GSMA called on European mobile operators to act now to take advantage of the growing smart energy sector, by accelerating rollout of low power wide area (LPWA) NB-IoT and LTE-M networks. The GSMA CTO Alex Sinclair said: “The IoT is fundamentally disrupting the smart utility market by providing ubiquitous connectivity and real time, actionable data. Mobile IoT networks will take this further by offering energy providers a cost-effective solution to connect millions of smart meters. There is a real sense of momentum behind the rollout of mobile IoT networks with multiple global launches, however, there is still a huge runway for growth. We encourage operators to act now to capitalize on this clear market opportunity and further accelerate the development of the IoT.”

Cellular technology all the way

Utility providers need a secure, flexible and reliable communication infrastructure to connect and communicate with the smart meter network. Cellular technology offers an attractive connectivity option, as its wide coverage and support of NB-IoT and LTE-M low power wide area (LPWA) networks, allow utility companies to connect their smart meters easily and inexpensively virtually anywhere.

By utilizing the established, highly reliable communications wide area network (WAN) infrastructure, utilities can bring new services to market faster without taking on the costs of deploying and maintaining it themselves. Cellular technology guarantees a good long-term connection independent of the buildings where meters and gateways are deployed. It also allows firmware updates and maintains strong security best practices, which are typically stronger than other connectivity technologies.

The introduction of the NB-IoT and LTE-M technology has made a significant impact to the growing uptake of cellular connectivity for smart meter networks. Not only does this technology offer easily scalable deployments, it is also ideally suited for the provision of reliable connectivity to a very large number of remote devices. This, combined with its improved power consumption, reducing battery wear and the cellular grade communication security, makes LPWA cellular connectivity an even more attractive and lower cost option. Unsurprisingly then, utility companies seeking more cost-effective smart metering deployments are increasingly turning over their network operations to established LPWA operators and incorporating smart cellular communications infrastructures into their smart grids.

Overcoming hurdles

One of the that utilities face when considering their connectivity options is the long-term useful lifetime of smart meters, typically seen as between ten to fifteen years, with some utilities assigning twenty years. Over these durations, the prospect of maintaining one single connectivity arrangement with a service provider is slim, which introduces uncertainty. As network operators will not typically commit to such long-term contracts, utility providers are worried about being locked in and potential rate increases in renegotiations.  The alternative to renegotiation brings other concerns around the logistics, and associated cost and hassle of SIM swaps. Therefore, any low impact proposals for ‘future proofing’ cellularly connected deployments greatly adoption of such connectivity.

The introduction of remotely updatable embedded SIMs (eSIM) has provided a fresh connectivity approach for smart metering. manufacturers. Not only does soldering the SIM make it less attractive to would-be connectivity theft, it also mitigates lock-in concerns by making remote service provider switching possible. This has been realized via an industry standardized virtual SIM distribution methodology and ecosystem led by the GSMA. These SIMs are manufactured with a cellular network identity (a SIM profile) to provide connectivity at first power up and a communication conduit for the electronic delivery of the first and any subsequent service provider’s SIM. At the same time, SIMs provide an underlying backup/disaster recovery connectivity and are also enrolled for management within the certified remote SIM provisioning (RSP) ecosystem.

SIM evolution  - Sim evolution - Unlocking smart metering for MNOs – Arm Community – IoT blog – Internet of Things

With the Arm Kigen remote SIM provisioning (RSP) servers, operators can securely onboard (provision SIM profiles on) multiple smart meters over the air. For utilities, this means avoiding a long-term tie-in with an operator and the ability to switch cellular connection without any worry about cost or hassle. After the initial contract ends, there will be no need for the costly engineer visit and a physical change of SIM. Instead, the new chosen mobile operator can onboard and deploy their SIM profile to the smart meter remotely.

Arm is also working closely with industry partners and the standards to realize the integrated SIM (iSIM) which will reduce the cost and adoption barriers of cellularly connecting IoT devices further by removing the physical hardware and integration that is today associated with the SIM. Arm Kigen iSIM aims to leverage the low footprint of Kigen SIM OS and CryptoIsland IP to securely place the SIM functionality within an IoT device’s SOC or module.

In addition to the issue of physical handling of SIMs, interoperability is also a barrier to integrating mobile technology for large scale, cost-sensitive smart meter deployments. Kigen RSP offers flexibility with a modular design for easy integration with MNO and IoT platforms.

Maintaining security is another major concern for utility providers. In 2009 Puerto Rican smart meters were hacked en masse, leading to widespread billing fraud. Arm Kigen family offers SIM grade security, which ensures that mobile operators can deploy, host and assure the device’s unique identity and its associated network attestation credentials. This device and data security can be further enhanced by adopting the principles and methodologies laid out in the Arm Platform security Architecture (PSA). You can see details on security requirements for smart meters in this threat model.

Operators can also help utilities ease their journey during the initial deployment years by utilizing a proprietary connectivity management and aggregation platform. Arm Pelion Connectivity Management allows easy, secure, and cost-effective connection of smart meters on multiple network standards with a single global mobility contract. Learn more about the Pelion Connectivity Management solution at European Utility Week on booth A.J45.

Arm Kigen family   - Arm Kigen family - Unlocking smart metering for MNOs – Arm Community – IoT blog – Internet of Things

Arm, Iskraemeco and Elatec CSS to pioneer connected smart meters

The Kigen capabilities will be reiterated at the European Utilities Week, where we will team up with the smart meter vendor Iskraemeco and Elatec CSS Group, who supply the Kigen OS-based eSIM and iSIM products, to show how embedded SIM can benefit smart meter applications. Energy companies or smart meter operators will have the ability to seamlessly download and swap the current cellular subscription with a new one allowing savings from a better tariff plan, guaranteeing long term availability or quality assurance of the connectivity.

Arm is powering this solution with its Kigen M2M server and Kigen eSIM M2M OS. Both solutions are GSMA accredited and being deployed by MNOs and enterprises on a worldwide basis.

Find out more about Arm Kigen SIM solutions below.

Kigen SIM solutions

Source link


Please enter your comment!
Please enter your name here